FloorShield 25 High-Solids Floor Sealer

Name: FloorShield 25
Brand: GEARTH

Key Features

Seals and glazes in a single product: no separate sealer coat required

25% solids for a deeper gloss and a harder, more abrasion-resistant film

Fewer coats required to reach a high-gloss finish

Extends the interval between maintenance and re-coating cycles

Suited to high-traffic commercial, retail and institutional floors

Eco-friendly formulation for facilities reducing their chemical footprint

Locally manufactured

How to use FloorShield 25

Apply FloorShield 25 in thin coats over a clean, dry floor. The higher solids mean each coat takes longer to dry than the 15% grade, so allow for that in your schedule.

Prepare: strip old polish where required and clean the floor thoroughly with a GEARTH bio-enzyme floor cleaner. Rinse and let it dry completely.

Apply: lay thin, even coats with a clean applicator or flat mop, working in one direction. Do not flood the surface.

Dry: let each coat dry fully before the next. Drying takes longer than with FloorShield 15.

Build: apply two to four coats, depending on substrate porosity and the gloss level required.

Cure: keep traffic off the floor until the final coat has cured.

Solids content

25%

Coats

2 to 4, by substrate porosity and gloss required

Shelf life

Stable for 12 months

For routine maintenance coats and lighter traffic, FloorShield 15 is the better fit.

Store sealed at ambient temperature, out of direct sunlight, and do not allow to freeze.

About FloorShield 25

FloorShield 25 builds a thicker, harder glaze per coat than the 15% grade, for a deeper gloss and more resistance to abrasion. It is a sealing and glazing floor polish at 25% solids. Specify it for high-traffic commercial and institutional floors, or wherever you need a high-gloss show finish and longer intervals between maintenance coats.

Where FloorShield 25 is used

High-traffic retail floors

Shopping centres and stores where a harder, more abrasion-resistant film holds up to constant foot traffic.

Institutional floors

Hospitals, schools and public buildings that need a high-gloss show finish.

Longer re-coat intervals

Sites that want to stretch the time between maintenance and re-coating cycles, reaching high gloss in fewer coats.

Show finishes

Receptions, lobbies and showrooms where a deeper gloss is the priority.

Pack sizes

Choose the pack by the floor area you seal and the number of coats you build.

5 L

A single showroom or reception area, or a first trial.

25 L

A full recoat of a busy retail or institutional floor.

210 L

Contractors sealing multiple high-traffic sites.

1 000 L

Bulk supply for malls, campuses and hospital groups.

FloorShield 25: frequently asked questions

When should I choose FloorShield 25 over FloorShield 15?

Choose FloorShield 25 for high traffic, a high-gloss show finish and longer re-coat intervals. FloorShield 15 suits light to moderate traffic and routine maintenance coats.

Does it take longer to dry?

Yes. The higher solids content extends drying time compared with the 15% grade, so let each coat dry fully before the next.

How many coats are needed?

Two to four, depending on substrate porosity and the gloss level required. The higher solids mean fewer coats to reach a high-gloss finish.

Do I need a separate sealer coat?

No. It seals and glazes in a single product.

FloorShield 25