FloorShield 15 Floor Sealer and Glaze

Name: FloorShield 15
Brand: GEARTH

Key Features

Seals and glazes in a single product: no separate sealer coat required

15% solids for a controlled film build and faster drying between coats

Uniform gloss finish across the treated area

Protects the substrate from traffic wear, scuffing and spot staining

Simplifies routine maintenance: mop-cleanable finish

Eco-friendly formulation for facilities reducing their chemical footprint

Locally manufactured

How to use FloorShield 15

Lay FloorShield 15 in thin, even coats over a clean, dry floor. Two to four coats are typical, depending on how porous the floor is and the gloss you want.

Prepare: strip old polish where required and clean the floor thoroughly with a GEARTH bio-enzyme floor cleaner. Rinse and let it dry completely.

Apply: lay thin, even coats with a clean applicator or flat mop, working in one direction.

Dry: let each coat dry fully before applying the next.

Build: apply two to four coats, depending on substrate porosity and the gloss level required.

Cure: keep traffic off the floor until the final coat has cured.

Solids content

15%

Coats

2 to 4, by substrate porosity and gloss required

Shelf life

Stable for 12 months

For heavy traffic and a higher gloss build, choose FloorShield 25 instead.

Store sealed at ambient temperature, out of direct sunlight, and do not allow to freeze.

About FloorShield 15

FloorShield 15 seals the floor and builds a glazed protective film in one product, for a uniform gloss that resists scuffing and everyday traffic wear. At 15% solids it is the general-purpose grade. Use it for routine maintenance coats and floors under light to moderate traffic, where a thinner build per coat and faster drying are preferred.

Where FloorShield 15 is used

Concrete floors

Sealed and unsealed concrete, given a protective glaze that resists traffic wear and spot staining.

Vinyl and resilient sheet flooring

Offices, clinics and schools where a mop-cleanable gloss finish simplifies routine maintenance.

Terrazzo and terracotta

Decorative floors sealed and glazed in a single product, with no separate sealer coat.

Sealed porous tile

Tiled areas under light to moderate traffic that need a controlled film build and faster drying between coats.

Pack sizes

Choose the pack by the floor area you seal and how often you apply maintenance coats.

5 L

A single office, shop or clinic, or a first trial.

25 L

Routine maintenance coats across a larger building.

210 L

Contract cleaners maintaining several sites.

1 000 L

Bulk supply for large institutional or retail portfolios.

FloorShield 15: frequently asked questions

What is the difference between FloorShield 15 and FloorShield 25?

FloorShield 15 has 15% solids for light to moderate traffic, routine maintenance coats and faster drying. FloorShield 25 has 25% solids for high traffic, a high-gloss show finish and longer re-coat intervals.

Do I need a separate sealer?

No. FloorShield 15 seals and glazes in a single product.

How many coats should I apply?

Two to four, depending on how porous the floor is and the gloss level you want. Let each coat dry fully first.

How should I prepare the floor?

Strip old polish where needed, clean thoroughly with a GEARTH bio-enzyme floor cleaner, rinse and let the floor dry completely.

FloorShield 15