FloorLift Floor Polish and Sealer Stripper

Name: FloorLift
Brand: GEARTH

Key Features

Strips and removes most acrylic polymer floor dressings, sealers and polishes

Non-ammoniated: no ammonia odour or handling exposure

Immediate reaction on contact, reducing dwell time and labour cost

Highly concentrated: dilutes up to 1:5 with water

Selection of non-ionic and anionic surfactants plus glycol ethers

Proprietary preservatives extend shelf life

Environmentally friendly and biodegradable

Doubles as a heavy-duty cleaner on polymer-sealed surfaces

Applications

As a pretreatment stripper to prepare new floors for sealing with acrylic-based polymer floor polishing products

As a cleaner and stripper on all surfaces where an acrylic polymer floor sealer or polish has been applied

Periodic strip-and-repolish cycles in commercial and institutional facilities

Preparation of floors before applying GEARTH FloorGlow

How to use FloorLift

Dilute FloorLift up to 1:5 (weight for weight) with water. Go stronger or weaker depending on how thick the coating is and what type of polymer is on the floor.

Dilute: mix up to 1:5 w/w with water, depending on coating thickness and polymer type.

Apply: spread the solution evenly over the surface.

Dwell: leave it for a few minutes. The reaction begins immediately.

Scrub: scrub the surface to lift the softened polymer.

Rinse: rinse well with clean water before resealing or repolishing.

Dilution

Up to 1:5 w/w with water, set by coating thickness and polymer type

12 to 13 (alkaline)

Shelf life

Up to 1 year in the original packaging

FloorLift is alkaline. Wear gloves and eye protection and test an inconspicuous area first.

Store between 10 °C and 38 °C, sealed when not in use.

Keep it away from the GEARTH bio-enzyme products during use; disinfectants and harsh chemicals destroy their beneficial cultures.

Where FloorLift is used

Periodic strip-and-repolish

Commercial and institutional floors where built-up polish and sealer need removing before a fresh finish goes down.

New floors before sealing

A pretreatment stripper that prepares new floors for sealing with acrylic-based polymer floor polishing products.

Cleaning sealed surfaces

A heavy-duty cleaner on surfaces where an acrylic polymer floor sealer or polish has been applied.

Before FloorGlow

Prepares the floor before GEARTH FloorGlow is applied, as part of the GEARTH floor care cycle.

Pack sizes

Pick the pack by how many floors you strip in a cycle.

5 L

Occasional stripping of a single shop, office or clinic floor.

25 L

Cleaning teams running regular strip-and-repolish cycles.

210 L

Contractors servicing several large commercial or institutional sites.

1 000 L

Bulk supply for large portfolios and facilities management contracts.

FloorLift: frequently asked questions

Does FloorLift contain ammonia?

No. It is a non-ammoniated stripper, so there is no ammonia odour or handling exposure.

How strong should the mix be?

Dilute up to 1:5 weight for weight with water. Thicker coatings and tougher polymers need a stronger mix.

How long do I leave it before scrubbing?

A few minutes. The reaction starts immediately on contact, then you scrub to lift the softened polymer and rinse.

What protective equipment do I need?

It has a pH of 12 to 13, so wear gloves and eye protection, and test an inconspicuous area first.

FloorLift